Do you offer free estimates?

Yes, we provide detailed, no-obligation estimates across the entire Portland Metro area and surrounding communities.

Are you licensed and insured?

Yes, Hardwood Floors PDX is fully licensed in Oregon (CCB #207760), bonded, and insured.

Is Popovici Construction LLC related to Flooring PDX?

Yes. Popovici Construction LLC and Flooring PDX are two separate businesses run by two brothers, Pavel Popovici and Vasi Popovici, with a combined 30 years of experience.

Moved into a home with renovated floors? 5 steps to protect

Moving into a home with freshly renovated floors feels great, but the first few weeks can decide how well those floors hold up over the next several years.

If your floors were recently installed, sanded, stained, or refinished, use this checklist to protect your investment from day one. It is written for real move-in conditions: furniture, boxes, pets, wet Portland weather, and the pressure to settle quickly.

1. Do a careful inspection before fully settling in

Before furniture is fully in place, walk every room and look for:

Fresh scratches near entry points
Dents from moving equipment
Gaps, lifted edges, or noisy boards
Transition issues between rooms
Water marks near exterior doors, kitchens, and bathrooms

Take photos right away if anything looks off. Early correction is easier and usually less expensive, especially when the issue is limited to a few boards. If you see isolated damage, compare the symptoms with the hardwood floor repair service page before assuming the whole room needs replacement.

2. Set up a simple cleaning routine immediately

Sweep or dust mop regularly to remove grit.
Vacuum with a hardwood-safe attachment.
Use a lightly damp microfiber mop only when needed.
Clean spills as soon as they happen.
Keep a small towel near entries during rainy weeks.

Avoid harsh chemicals and avoid over-wetting the floor. If the renovation included sanding and new finish, give the coating time to cure before any aggressive cleaning. The maintenance article, Hardwood Floor Maintenance After Installation or Refinishing, has a more detailed schedule.

3. Protect high-risk areas from day one

Most move-in damage happens before people have settled into normal habits. Furniture legs, appliance dollies, cardboard grit, and delivery traffic can all mark a new finish.

Area	Protection step	Why it matters
Entry doors	Use breathable mats and remove wet shoes.	Moisture and grit are the fastest way to dull finish.
Dining areas	Add felt pads to every chair leg.	Chair movement creates repeated scratch patterns.
Hallways	Use runners after the finish is cleared for rugs.	High-traffic lanes wear faster than rooms.
Appliances	Use protective boards and lift whenever possible.	Heavy items can dent boards or tear finish.
Pet zones	Trim nails and wipe paws.	Nails and water marks compound quickly.

Do not place rubber-backed mats on newly finished wood unless your installer has approved them.

4. Keep humidity stable indoors

Portland weather can swing moisture levels throughout the year. Wood responds by expanding and contracting, even when the floor was installed correctly.

Aim for indoor humidity around 35 to 55 percent.
Use a humidifier in dry periods and dehumidification when needed.
Dry wet shoes and pet paw prints quickly.
Avoid leaving windows open during damp weather if the floor is still curing.

Stable moisture helps prevent cupping, gaps, and seasonal movement. If the floor is new and you are not sure whether the right species or finish was used, the wood floor selector explains practical differences between wood options.

Ready to transform your floors? Get a Free Quote today to schedule a consultation and see how we can bring your vision to life.

5. Know when refinishing, repair, or installation is the right path

New homeowners often inherit floors without knowing exactly what work was done. Use this quick guide to decide what to ask a contractor.

Situation after move-in	Better question to ask
Finish looks cloudy, scratched, or uneven	Can hardwood refinishing restore the floor without replacement?
Dust, old finish, or sanding marks are a concern	Would dustless floor sanding be appropriate for the next refinishing cycle?
A few boards are cracked, stained, or loose	Can board-level repair solve this before it spreads?
The floor is unstable, mismatched, or wrong for the home	Is new hardwood installation the better long-term value?

If you notice early wear, dull traffic lanes, or isolated board damage, a maintenance visit now can prevent a full replacement later.

Why homeowners across Portland call Hardwood Floors PDX

Hardwood Floors PDX provides:

Hardwood floor installation
Sanding and refinishing
Staining and color updates
Board repair and replacement

The company is licensed, insured, and bonded, CCB #207760, with strong local review history. If you need a move-in inspection or want help prioritizing repairs, start here: Ask for a Free Quote.

Contact Hardwood Floors PDX

Frequently asked questions

How soon can I move furniture onto newly finished floors?

Most projects allow careful furniture placement after about 72 hours, but always follow your installer's exact timeline. Lift furniture, use felt pads, and wait on rugs until the finish is ready.

Can I change my floor color later?

Yes. Most hardwood floors can be sanded and stained again if thickness and condition allow. A contractor can confirm whether there is enough wear layer left.

How often should hardwood floors be refinished?

Many homes need refinishing about every 7 to 12 years, depending on traffic and maintenance. Timely recoating can extend that window.

Are humidity changes really that important?

Yes. Seasonal humidity swings are one of the biggest factors in hardwood floor movement and long-term stability.

Where Hardwood Floors PDX works

We're based in Portland and serve homeowners across the metro. If you're starting a project, here's where we already have local experience and project history:

Cities we serve: Portland · Beaverton · Lake Oswego · West Linn · Gresham · Happy Valley · Clackamas · Oregon City · Tigard · Tualatin · Hillsboro · Aloha · Bethany · Wilsonville · Milwaukie · Sherwood.